#Bronica sq a shutter sheed full#

The top one is for the fresh film spool while the bottom one is for the empty take-up spool.ДҐ. There are two spool holders on the film holder. The film holder can be taken out for film loading upon opening the back cover. To open the back cover, squeeze the left and right back cover release buttons, in the arrow-indicated directions, at the same time and the back cover will open. Simply shift the film back up slightly and pull it away.ДҐ. Depress the film back release button and the lower end of the film back can be removed, as illustrated.

To remove the film back from the main camera body, insert the dark slide into the dark slide slit, as illustrated, with the mark on the dark slide at the top end. Attachment and Removal of Film Backs (conвЂ™t) B. Thus, it will not be possible to check the battery status (four LR44) loaded in the main camera body with the motor drive attached.ДЈ. In other words, the electrical circuit is switched so that the batteries of the motor drive operate the main camera body. Battery Checking (conвЂ™t) * When the Motor Drive SQ-I is attached to the SQ-Ai main camera body, battery power for the main camera body is supplied from the Motor Drive SQ-I. Push the battery chamber cover release button on the base of the camera main body in the arrow-indicated direction and the battery chamber cover will spring open. * The batteries may be obtained at any photographic equipment or electrical appliance dealer. Four 1.5-volt alkaline-manganese (LR44) batteries must be used.

Loading the Battery The electronically controlled leaf shutter and the electro-magnetic shutter release system will not work without loading the batteries. Parts of the ZENZA BRONICA SQ-Ai Flash synch socket Aperture ring Depth of field scale Distance scale Focusing ring Lens alignment dot Waist-level finder Focusing hood catch Magnifier release lever Shutter speed dial Shutter speed scale Magnifier Film speed contact Back cover release button (left) Shutter release button Back cover release button (right) Shutter release button locking ring Exposure counter Film winding crank Multiple exposure lever Finder release button Lens release button BattДЎ. Specifications of the ZENZA BRONICA SQ-Ai (conвЂ™t) Flash Synchronization Film Back Finder Focusing Screen Battery Checking Battery Dimensions Weight X-setting (up to 1/500 sec.) auto-flash control based on direct light measurements at the film plane with optional SCA System Adapter and SCA 300 System compatible electronic flash units. Standard lens Zenzanon-PS 80mm F2.8 6 elements in 5 groups multi-layer anti-reflection coated 50. Frame Size Film 55.6mm x 55.6mm 120/220/135 roll film and Polaroid Land pack film, with exclusive film backs. Specifications of the ZENZA BRONICA SQ-Ai Type 6 x 6 cm format lens shutter single lens reflex camera, with interchangeable lens, film back, finder and focusing screen systems.

#Bronica sq a shutter sheed full#

Developed for the professional photographer, the Zenza Bronica SQ-Ai also retains the full System of Photography of the earlier SQ-A, as well as having extensive interchangeability with the full range of accessories available for the SQ-A.Д¬ontents Specifications of the ZENZA BRONICA SQ-Ai Parts of the ZENZA BRONICA SQ-Ai 1. SQ-Ai Congratulations on your choice of the Zenza Bronica SQ-Ai single lens reflex camera based on the technology and experience gained with the Zenza Bronica SQ-A.

Bronica sq-a shutter sheed